View Cart MY FAVORITES

FAQ  |  SEWING SUPPORT  |  SITE MAP  |  CONTACT US  |  MADEIRA THREAD CHART

Return to Sewing Support index Dakota Collectibles Help: Sewing Support Questions Hints & Tips Applique Template Applique Instructions with Template Applique Instructions without Template--> Backing Fabric Run a Two-or-More Part Design Hooping Needles Removing Embroidery Rolling Start Test-Sewing Test-Sewing on Felt Thread Trimming of Embroidery Threads Water-Soluble Topping Design Detail Lines are Off Beautiful Test Sew, Doesn't Look Good on Garment Pocket Topper Application Hints & Tips Run a Two-or-More Part Design (HOME) When starting to run a design, write down the numbers the hoop is positioned at and, if the design was rotated, write down the degree. Run the first part of the design. When the screen says "Finished", do not cut the thread or remove the hoop from the machine unless it is actually at a color change. Also, try not to have to replace the bobbin at this point. Bring up the second part. Position the design according to the numbers and rotation in step 1. Optional: Press the "Pattern Start Key" on the machine if that is available. This will move the needle to where the first stitch will be and it should be directly over the last stitch made in the first part. Continue stitching. By not cutting the thread, there is no need to worry that lock stitches aren't present to secure the joined area. HOME | MY ACCOUNT | CATALOG | SEARCH | HOME EMBROIDERY | CORPORATE INFORMATION | INDUSTRY LINKS | HELP | CONTACT US DESIGN SUGGESTIONS | TERMS OF SERVICE | PRIVACY STATEMENT Proper use of this website requires IE 6.0, Netscape 7.0 or higher, or Get Firefox Send questions or comments about this website to our WebMaster. © 2024 Dakota Collectibles. All Rights Reserved.